Ohjelman tiedot:
| Nimi: | GPU-Z | | Versio: | 0.5.8 | | Tekijä: | techPowerUp | | Lisenssi: | Freeware | | Järjestelmä: |  | | Päivitetty: | 24.01.2012 | | Kotisivu: | GPU-Z |
GPU-Z näyttää tarkat tiedot näytönohjaimestasi.
Ohjelma tukee sekä nVidian että ATI:n kortteja ja näyttää niistä mm. mallin, kellotaajuudet, varjostintekniikkojen tiedot ja valmistustekniikan. Lisäksi ohjelma näyttää tietoja näytönohjaimen sensoreista, kuten lämpötilan ja tuulettimen pyörimisnopeudet.
Lataa ohjelma:  Muutosloki : Lisää ->Piilota <-
0.5.8
Added explanation about PCI-Express power savings and 3D render test to accurately measure bus config under load
Added function to display ASIC quality for Fermi and Southern Islands. (Located in the GPU-Z system menu; click the icon in the top left of the window)
Fixed crash on older ATI cards
Added voltage monitoring for HD 7970
Improved real-time clock monitoring for HD 7970
Fixed OpenCL detection for AMD Antilles, Whistler, Seymour, Blackcomb
Improved default clock reading for AMD HD 7970 and Fusion
Added support for AMD FirePro V7900, HD 6930, HD 7690M, HD 6410D
Fixed Intel Sandy Bridge IGP to be DirectX 10.1, 32 nm
Added support for NVIDIA Tesla C2075, GeForce GT 630M
0.5.7
Added support for AMD Radeon HD 7970, HD 7350
Fixed "APIC counter broken" message on AMD Fusion Graphics
Fixed PCIe 3.0 showing up as 2.0
Fixed fillrate calculation on Fermi architecture
Fixed ROP count on GT 420, GT 520, HD 5450, HD 6450
Fixed random values showing as default clocks on some NVIDIA cards
Fixed random value showing as shader clock on NVIDIA cards without shader clock
Added / corrected release dates for HD 3650, FirePro V4800 and V3800
Added process size, die size, transistor count for Radeon E6760
Added transistor count for FirePro V4900
Improved detection for HD 5570, HD 6450A, HD 6470M...
0.5.6
Removed PowerColor hardware giveaway
Added support for ATI Radeon HD 6320, ATI FirePro V9800, AMD FirePro V4900
Added support for GeForce GTX 560 Ti 448 cores, GeForce GTX 460 v2, NVIDIA Quadro NVS 420, NVIDIA Quadro NVS 450, NVIDIA Quadro FX 380 LP
Fix for incorrect shader reading on Blackcomb
Added basic detection for NVIDIA Kepler GK107
0.5.5
Added PowerColor hardware giveaway
On multi-GPU systems, GPU-Z will remember the selected card from the selection dropdown
Added full support for AMD A-Series Fusion processors
Added detection for ASUS MARS II
Fixed shader count detection for Blackcomb (mobile AMD Cayman)
Improved BIOS version reading on NVIDIA
Added support for NVIDIA GeForce GT 560 Ti OEM, GT 545, GT 530, GeForce GTX 580M, GT 555M, GeForce 520MX, GT 520M, 410M, 305M, Quadro 5000, Quadro 4000M, Quadro 400
Added support for AMD HD 6290, Radeon E6760 & E4690, FirePro V8800, FirePro V3700, FirePro 2460 (FireMV)
0.5.4
Considerably improved startup time on ATI cards, faster on NVIDIA, too
Improved rendering on high-DPI screens
Fixed ROP count reading on AMD Radeon HD 6790, Turks & Whistler
Fixed sensor count on Caicos, Whistler, Turks
Fixed OpenCL detection on some NVIDIA drivers
Memory size reading support for AMD Fusion GPUs
Added die size and transistor count for GF108, GF114, Turks, Caicos
Added detection for more Intel Sandy Bridge GPUs
Added detection for variants of GT 220, GTS 450
Added detection for faked cards based on GTS 250, 9600 GT, NV41M
Added detection for GeForce GTX 560 non-Ti, GT 520, GF116 based GTS 450, GT 550M, GeForce 315, GeForce 405, Quadro 2000 & 6000
Added detection for GeForce GTX 560M, GT 555M, GT 550M, GTX 540M, GT 525M, GT 520M, GTX 415M, GT 410M, Quadro 1000M, NVS 4200M
Added detection for GT218 based ION 2 / 9300 GS / 8400 GS / 405 / NVS 300
Added detection for HD 6750, HD 6770, HD 6850M, HD 6970M, HD 6670M, HD 6650M, HD 6330M, FirePro 2260
0.5.3
Added support for AMD Radeon HD 6790, FirePro V5800
Added support for GeForce GT 555M, GTX 540M, G315M, Quadro FX 600, FX 2800M, Quadro 4000
Fixed GeForce GTX 590 release date
Added support for voltage controllers VT1556, uP6266, uP6218
Added VDDCI measurement on CHL8228 based ATI cards
Added capability to show sensors in TechPowerUp OSD Server
Fixed several crashes and resource leaks
0.5.2
Added support for NVIDIA GT 440, GTX 550, GTX 560, GTX 570, GTX 590
Added support for AMD HD 6990
Added detection support for more Sandy Bridge IGPs
Fixed ROP count on ATI Madison
Improved OpenCL detection for ATI
Added CHL8228 voltage controller support for Cayman Pro and XT
Improved driver based voltage monitoring support for ATI cards
Added startup parameter /card followed by the adapter index, starts with 1.
Several crash and stability fixes
0.5.1
* Added support for NVIDIA GTX 560 Ti, 480M, 485M
* Added transistors and die size for 460M, 445M, 435M
* Added release date for 6800 GT, 6600 GT, 6600, 6200, 8800 GTX, 8800 GTS, 8800 Ultra, 8600 GTS, 8500 GT, 8800 GS, 9600 GSO, 8800 GT, GTS 250, GT 440
* Added preliminary support for AMD Zacate and Ontario APUs
* Found a new way to disable NVIDIA's power limiter
* Added support for GTX 570 and GTX 560 to power limit disable function, the parameter is now called /GTX500OCP
* Fixed crash in sensors panel
* Acer PCI vendor now using a shorter text that fits the field width
* Added CHL8214 & CHL8226 support for AMD Barts and Cayman
* Improved the automatic update check to run completely in the background and only appear when an update is available (manual update check is unchanged)
0.5.0
* Added full support for Radeon HD 6950 and HD 6970
* Fixed TMU/Texture Fillrate rounding error on NVIDIA cards
* Improved voltage monitoring support for GTX 570
* Workaround for ATI OpenCL driver crashing GPU-Z on systems with NVIDIA cards
* Fixed crash when driver version could not be read
* Fixed crash when splash screen interrupted by message box
0.4.9
* Added support for GeForce GTX 570, GTX 460 SE
* Added support for PCI-Express 3.0
* Added PowerColor Giveaway
* Added Colorfire PCI vendor ID
* Added detection for AMD Radeon HD 6310, HD 6370
* Fixed BIOS >64k reading on GF110
* Added GT215 based GT 220
* Fixed TMU count on GF104
* Improved default clock reading on GeForce GTX 580
* Better error handling for memory type detection code
0.4.8
* Known issue: BIOS reading on GTX 580 does not save the whole BIOS, check the GPU-Z test builds forum
* Added support for NVIDIA GeForce GTX 580 and future GF104 variants
* Updated TMU/Texture rate calculation method. Please report any errors in the forums
* Fixed memory clock monitoring on HD 6850, HD 6870
* Fixed label corruption on cards without any shaders
* Fixed rare CrossFire detection bug on ancient ATI drivers
* Added voltage monitoring fallback for ATI cards with unsupported voltage controller
* Updated PCI vendor ID for PowerColor
* Removed MSI giveaway
0.4.7:
* Improved support for AMD Radeon HD 6850 and HD 6870
* Added support for NVIDIA GeForce GT 430, GT 420
* Fixed default clock reading on Fermi architecture cards
* Added voltage controller support for Colorful iGame GTX 460
* Added PCI Vendor detection for Colorful
* Added TMU count and die size for GF106
* Synchronization mutexes are global now
* Improved stability when running multiple instances of GPU-Z / Fixed "the driver has been marked for deletion" error
0.4.6:
* Added MSI hardware giveaway
* Fixed temperature readings getting stuck on ADT7473 sensor (GTX 400 cards)
* Fixed broken BIOS reading on all cards
* General improvements to Intel support, still far from perfect
* Added support for ATI FirePro V8750
* Added support for GeForce GTS 455, GTS 450, GT 440, GT 430, GT 420, GT 330, GT218 based ION, GTX 470M, GTX 460M, GT 445M, GT 435M, GT 425M, GT 420M, GT 415M, GeForce 310M
* Added basic detection for AMD Radeon HD 6000 Series
* Improved handling for unknown NVIDIA cards
* Added fan RPM monitoring for NVIDIA cards
0.4.5:
* Fixed shader count on NVIDIA GTX 460, added die size & transistors
* Fixed ROP count on AMD Redwood
* Added support for ATI FirePro V7800, ATI IGP 320M, ATI FireGL X1, ATI HD 4200 variants
* Added launch on Windows startup function accessible via system menu and supporting UAC
* Autoupdater will not check for update when no Internet connection detected
* Fixed browser not starting correctly from autoupdater
* Screenshot detection that promotes GPU-Z's own screenshot upload feature
* Sensor data collection limited to 6 hours of data per sensor (~250 KB)
* Shortened Clevo PCI vendor name
0.4.4:
* Added support for NVIDIA GeForce GTX 460, GT 330, GT 315, GT216 based ION
* Added support for AMD HD 5670 (Juniper), Mobility HD 5430, Mobility 4200, Mobility 4100
* Added PowerColor hardware giveaway
* Added die size measurement for NVIDIA GF100
* Added option to GPU-Z's system menu to show temperatures in °F
* Fix for BIOS reading on ATI
* Fixed decimal points in ADT7473 reading
* Fixed crash on GeForce 8300 IGP
* Added clock monitoring for RS780 variants
* Improved clock monitoring for ATI R6xx architecture
0.4.3:
* Added full voltage controller monitoring for GeForce GTX 480
* Added real-time clock monitoring for GF100
* Added detection for vendor GALAXY
* Complete revamp of voltage controller architecture. Adds voltage monitoring for many ATI & NVIDIA cards and generic monitoring method for NVIDIA cards via driver.
* Added support for >4 GB memory on NVIDIA
* Fixed memory clock reading on some HD 5670 cards
* Fixed thermal sensor count on some ATI Evergreen models
* Fixed incorrect default clock reading on some ATI Evergreen models
* Added detection for NVIDIA GTX 465, GT 320M GT 335M, ION variant, GT 340, Tesla C2050, Tesla M2050, GTX 285M, GT 325M, Quadro FX 880M, Quadro FX 1800M
* Added detection for ATI HD 5570, Mobility 4550, Mobility 5870, HD 4250, HD 4290, FirePro V7750
* Added detection for Intel GMA 3150
* Added fix for ADT7473 coldbug (GTX 480) via commandline parameter /fixcoldbug
* Added OCP adjustment for CHL8266 (GTX 480). Use it via command line parameter /chl8266ocp without parameter to query, with numeric value seperated by space to set. This is a permanent change that will not be reverted by powering down the system.
* Added languages Hungarian and Spanish
* Updated languages French, Italian, Russian
0.4.2:
* Fixed an issue on all NVIDIA cards that would sometimes cause them to lose fan control when GPU-Z is running. Please don't run pre-0.4.2 and 0.4.2 at the same time, this might result in incorrect readings in the 0.4.2 window.
* Fixed system crash on MSI HD 5830 TwinFrozr II
* Validation upload now uses Unicode for entered name
* Reverted memory bandwidth calculation introduced in last version. It introduces too much confusion, we will go with what all companies use in their marketing material, even though we believe it is not correct. Using power of 10 again now, 1 GB/s = 1,000,000,000 Bytes per Second.
0.4.0:
* Added support for NVIDIA GeForce GTX 470 and GTX 480
* Added voltage monitoring for HD 5750, 5830, 5870 Lightning
* Added support for Intel Pineview
* Fixed double memory clock reading on NVIDIA w/ GDDR5 (real clock is now displayed)
* Fixed rounding errors in RV7xx and Evergreen fan monitoring code
* Added tooltip translations for Albanian and Chinese Traditional
* Memory bandwidth calculation uses GB now instead of GiB
* Added new hardware giveaway tab in cooperation with ASUS
0.3.9:
* Added localized tooltips in the languages: AM, AR, BG, CN, DE, FA, FR, IT, PT, RS, RU, TR, UA. Default language is your system language, you can change this setting in the system menu of GPU-Z.
* Added support for ATI HD 5830, HD 5770, HD 5750, HD 5670, HD 5570, HD 5450, HD 4860, HD 4750, Mobility HD 3430, M97, Mobile HD 5850, 5730, 5650, 5470 (Broadway, Madison and Park)
* Added support for NVIDIA GeForce 6200A, GTS 250, 9800S, 205, 310, GT 320, GT 240, GTS 360M, 230M, 330M, 240M, G105M, Quadro NVS170M, G210M, GTS 250M, future MCP, more ION variants.
* Added support for Intel GMA500, Clarkdale, Arrandale
* Added detection for variants of NVIDIA NV41, G94, G98, ATI RV350, RV370, R480, RV515. Most of them used on fake cards relabeled to NVIDIA 9x00 series.
* Improved default clock BIOS parsing on NVIDIA
* Fix for incorrect default clocks on HD 5000 Series
* Fixed incorrect real-time clock monitoring on some HD 5000 cards
* Added more accurate real-time clock monitoring function for NVIDIA
* Improved OpenCL detection on ATI R700, RV790, all HD 5000 cards
* Added temp. monitoring support for some Intel IGPs
* Improvements to CUDA detection
* Removed memory chip input fields from VGA BIOS Upload
0.3.8
* Added framework for translations in GPU-Z, to do that we need your help. Please go to tpu.me/forums/forumdisplay.php?f=72 to submit contributions in your language
* Added sensors to monitor GPU load percentages on NVIDIA
* Fixed startup on Windows 2000 (DLL not found)
* Improved detection/added sensors for ATI M86
* Fixed several NVAPI crashes
* Fixed crash when PhysX not available
* GPU-Z can now be set in its system menu to be always on top of other windows
0.3.7
* Added Infotips for sensors
* Fixed crash when ATI ULPS CrossFire enabled
* Added full support for ATI HD 5970 (Hemlock)
* Added full support for NVIDIA GeForce GT 240 (GT215)
* Added "ULPS active" note to CrossFire status when ULPS active
* Fixed overclocks via CCC not showing correctly
* Added checkboxes to show availability of CUDA, PhysX, OpenCL and DirectX Compute
* Improved memory type detection for GT 216, GT 218
* Added voltage monitoring support for HD 5770
* Disconnected fan now shows correctly in sensors (when detectable via hardware)
* Improved accuracy of ATI GPU load monitoring
* Added detection for ATI RV380/RV530 cards relabeled to NVIDIA 9400/9500/9600 GT
* Added support for NVIDIA 9300 SE, NVS450, GT 240, GTS 250M, G102M
* Added support for Intel G41
0.3.6
* Added Infotips, they can be turned off in the system menu
* Added preliminary support for ATI Radeon HD 5900 (Hemlock), HD 5600 (Cedar), HD 5300 (Redwood)
* Added full support for HD 5850, HD 5770, HD 5750
* GPU-Z no longer crashes on ATI ULPS enabled CrossFire configurations
* Fillrate Pixel, Fillrate Texel, Memory Bandwidth will now correctly recalculate when clocks change
* Bus Interface, ATI shader count is now periodically refreshed
* Added support for HD 5850 voltages
* Second voltage on HD 5870 correctly named VDDCI
* ATI clock reading code fixed
* Fixed default clock reading on HD 5850
* Added Mutex to avoid collisions on long I2C operations
* Added basic detection for a lot of NVIDIA card fakes (NV41 sold as 9800 GT etc..)
* Added detection for ATI FireGL V7600, M92, RS880
* Added detection for NVIDIA GT 130, 9600 GE, Tesla C1060, G 220, GT 220, NVS 3100, GTS 160 M, NVS 160M, NVS 150M, G105M, GT 240M, G105M, G210M, G310M, ION LE
* Fixed die size and transistor count on G72 M
0.3.5
* ATI Radeon HD 5870 (Cypress) fully supported (includes voltage monitoring)
* Added or improved support for NVIDIA FX5500, 9400 GT, G73, GTS 240, GT 140, FX 1800, GT 120 (Apple), FX 380, FX 350, GTX 295 Single PCB, Quadro CX, FX 5800, FX 4800, FX 3800, GTX 180M, GTX 260M, FX 2700M, G 110M, GT 120M, GT 220M, FX 1700M, G 105M, MCP79MX
* Added or improved support for ATI HD 4730, HD 4650 AGP, M92, M96, M98
* Added clock reading for Intel i910, i915, i945, 946
* Added support for DDR3 detection on G9x
* Added monitoring support for RV7xx based mobile chips
* Voltage controller "slaves" are now called "phases"
* Added Intel Havendale detection
* Fixed BIOS parsing on some newer HD 4870 cards
* Added voltage monitoring support for MSI N275GTX Lightning
0.3.4
* Fixed RV740 Bugs: ROP count, shader count, real-time core clock, BIOS dump size
* Fixed number of transistors on RV790
* Fixed BIOS reading on RV790
* NVIDIA driver version is returned correctly on Windows 7
* GPU-Z should work again on Windows 2000 without PSAPI.DLL
* Added voltage reading support for HD 4890
* Fixed default clock reading on ATI cards that have default clock < boot clock
* Fixed GM45 to be 65 nm and DX 10.0
* Added release date for GTX 275
* Fixed GT 130M to be 55 nm and added its release date
0.3.3
* Added support for RV740 (HD 4750, HD 4770) and RV790 (HD 4890)
* Fixed G98 shader count
* Fixed GT200 process size calculation
* Added support for GTX 275
0.3.2
* Clock reading on ATI cards fixed
* GT200b is now detected as 55 nm
* Added detection for GeForce GT 120, GT 130, GT 130M, FX 5200, 9400 GT, 9600 GSO 512, FX 2700M, 9500 GS, Quadro FX 540M, Quadro FX 3700M, 9650M GT, Quadro FX 370M, 9400 IGP, 9300 IGP, 8200M G
* Added support for S3 Chrome 500 Series
* Added new ATI logo
* Fixed screen corruption during screenshot of sensors tab
* Added support to show lowest, highest and average reading on sensors tab (click on sensor value to switch)
* Fixed number of texture units on RV730
* Fixed Catalyst version reading
0.3.1
* Fixed crash on systems without NVAPI (Win 2K, old NV drivers)
* Optimized RV770 BIOS reading code for speed (faster application startup)
* Improved voltage reading code for recent ATI cards
* Added support for fan speed monitoring on ForceWare 180.xx and up
* Added voltage monitoring for NVIDIA (GT200)
* Changed reading method for RV770 sensors, fixes race conditions with other software and on-board fan control
* NVIDIA 9800 GTX+ listed as 55nm now
* Added support for Intel Q43/Q45
* Added support for NVIDIA Quadro FX 4700 X2, GTX 295, GTX 285
* Added preliminary support for NVIDIA GT212, GT214, GT215, GT216, GT218
|
|
